• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft by using the Ghost Immobiliser. It's discreet and does not require any additional key fobs.

The device uses buttons on your vehicle (steering wheels, door panels and centre console) to generate a unique pin sequence that can be changed up to 20 times. This will allow your vehicle to start.

Simple PIN code change process

Many homeowners are upgrading their security due to the rise in vehicle theft. There are a variety of aftermarket security devices including tracking systems, alarms and immobilisers. They're not all equally effective in protecting your car. While a tracking device can assist you in locating your car in the event of theft, it will not stop the crime from occurring in the first place. An immobiliser, on contrary, does exactly what is ghost immobiliser it says on the tin: it shuts down your car's engine so that it cannot be started. The Autowatch Ghost is one of the most advanced options available, making it almost impossible for thieves steal your car.

Utilizing the buttons already in your car The ghost device generates an unique sequence that must be entered before the engine will start. This can be done using the window, heater or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their car without the need to use the button sequence. This feature is particularly useful when you need to hand your car over for valet parking or maintenance, as the immobiliser is activated, but not disabled.

The Ghost is an innovative and unique device that works with your vehicle's buttons rather than as a separate unit. This means that it's not just a highly effective security measure against theft from your vehicle but also a transferable device over to any future cars you own, making it much more of an investment than traditional steering wheel locks.

Weatherproof tiny device

The Autowatch ghost immobiliser is an advanced security system that guards your car from key cloning, hacking and ECU swapping. It's a weatherproof and small device that connects directly to your vehicle's ECU over the CAN data bus to disable the engine. It can be plugged into the vehicle without additional wiring and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices, which are a common technique used by thieves to circumvent immobilisers.

The benefit of CAN data over conventional systems is that they operate in a silent manner. It is not able to be detected by sophisticated RF scanning and code-grabbing technology as well as identified by conventional diagnostic tools. The Autowatch Ghost doesn't use LED indicators, but instead uses buttons on your vehicle, such as the steering wheel, centre console or doors, to create unique sequences for disarming. The sequence can be extended by up to 20 presses for extra security. The iPhone app only allows one connection, and comes with the Ghost's unique pairing code. the Ghost. All communication between the two devices is secured.

The Ghost Immobiliser problems prevents car thieves adding a new ignition key or replacing the ECU to bypass the immobiliser. It will only allow the engine to start when the correct PIN code is entered. It is also possible to put it into Valet/Service mode for temporary operation (with specified parameters, such as a 30mph speed limit) so that you can transfer your vehicle to a valet service for maintenance without having to enter a PIN code.

Tested for each vehicle

The Autowatch ghost car immobiliser is a world-first aftermarket immobiliser for CANbus. It can be connected to the wiring cost of ghost immobiliser your vehicle and also to the engine control unit (ECU). The device snoops on electronic signals to block your car's system from performing its normal initialization process until you enter the passcode you have created. The system can be activated or deactivated by using your smartphone's application without the need for additional wires.

The factory-installed immobilisers function by using a transponder, which is built into the key. This sends a message to the ECU. If the correct code is sent the car will begin however, if the transponder is replaced by one from a different vehicle, the immobiliser won't recognize it. This makes it possible for the vehicle to be started and stolen. The Ghost immobiliser was developed by an South African company at the forefront of vehicle security systems technology. It shields your vehicle from hacking, key cloning and even key theft. The only way that a burglar could take your car is physically towing it away and even then they would not be capable of driving it.

Ghost utilizes the buttons of your car, such as the indicator stalk as well as the steering wheel and door panels to generate an individual PIN sequence that can be changed that needs to be entered before you can drive. This is done without any additional hardware, like keys fobs. It can take up to 20 presses. It is also undetectable by diagnostic equipment and does transmit radio frequency signals, meaning thieves cannot use sophisticated RF scanners or code grabbing technologies to identify that a system has been installed.

Ghost is more difficult to remove than car alarms, which require disarming with the buttons. This makes it an excellent supplement to a GPS tracker which helps locate your car after it's been stolen.

Override of emergency PIN code

You do not have to look too far on social media to see stories or even videos of vehicles that were stolen by car thieves using the most advanced technology tools available to them. This includes key-cloning devices and hacking devices that allow them to start your vehicle without the original keys.

The Ghost immobiliser has been specifically designed to prevent this and provide you with an additional layer of security to prevent your vehicle from being targeted by thieves. It creates a unique pin code by pushing the buttons on your steering wheel, door panel and on the centre console. The unique pin code is entered in conjunction with your original key fob to prevent the engine from getting started. The unique override pin is located on a black card that you will receive after the installation. It is easy to remember because there aren't any LED indicators.

The device is hidden within the wiring of the vehicle and doesn't emit radio signals. Therefore, it cannot be detected by diagnostic software which can identify what type of security systems you have installed. This makes it an excellent alternative to a tracker.

Unlike most other security systems that use a relay inside the engine bay, these CANBUS Immobilisers connect with the vehicle's ECU and BCM via CAN data bus (brand dependent). This allows them to disable the vehicle completely through the use of a digital block of commands that is sent to both the ECU and the engine.

It is also possible to connect an analog immobiliser, alarm, or tracker with these systems but this must be specified before installing the device. They also work with valet and service modes, and are a great alternative to a tracker device when you take your car into the dealer to address an electrical issue.

Service/Valet Mode

In recent years, there has been a increase in the number of vehicles that are stolen without owners' keys. With easy access to key cloning equipment & door lock pick sets it is now easier than ever for thieves to steal your prized possessions. We have developed the Autowatch ghost immobiliser price Immobiliser to combat this. It blocks your car from being driven, even if you keys have been cloned.

It connects directly to your car's ECU (Engine Control Unit) through the data loop called CAN. It's completely silent as it does not use radio frequencies or key fobs. This means it isn't detected by diagnostics or any other car hacking devices. It also prevents the addition of an additional key or replacing the ECU to bypass the system, since only the correct PIN code will allow the engine to start.

The device is concealed inside your car, using buttons on the steering wheel, the centre console and door panels. Before you can start your car, you need to enter a unique and changeable PIN code that can be as long as 20 digits.

This is the first aftermarket immobiliser CAN bus that has been designed to stop your car being driven away or started without a PIN code being entered prior to. If the device is armed and you attempt to drive off it will display a warning on your dash that will flash regularly for around 300m, if you enter your PIN code at this point it will disarm the anti-hijack and your car will continue to drive just as normal. If you do not enter your PIN at this point, the indicator will continue to flash and will require a new PIN code every attempt to start your vehicle.