• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Door Handles Replacement Guide

Replacing the handles on your doors made of upvc is an easy DIY task once you have the correct measurements. These measurements include the distance between the handle's backplate fixing centres (sometimes called PZ) and the centre of the key hole.

The most commonly used uPVC handle is made up of two inline levers. One inside and one exterior, connected with spindles. They are used to operate the multipoint lock that is found on uPVC and aluminium doors, and also on some wooden doors.

Brands and finishes

A broken uPVC door handle can be more than just a minor inconvenience. It can also make your home vulnerable to intruders who may be able to force the lock to open and gain entry into your home. This is why it's important to recognise the moment your uPVC door handles are starting to fall apart and take action as soon as possible.

It's good to know that replacing your uPVC handles for your front door is a fairly simple task that only requires a few tools and some meticulous measurements. In most cases, you can just screw in your new uPVC handle and you're good to go. It's always best to choose locks and handles that meet the highest standards of security.

There are a number of different types of uPVC handles available that you can pick from. There are many different types, including lever/lever handles, pad handles, offset handles and snib handles. Lever/lever handles, which consist of two handles inline that can be moved, are a favorite among homeowners. Pad uPVC handles are smaller and feature an offset design. This lets you secure the exterior of your home after entry.

A uPVC offset handle is comprised of two pads, one fixed and the other movable. This type of handle is usually used on sliding patio doors. Snib handles are like offset handles, but they can be employed on uPVC french doors.

It is important to take into account the style of your existing doors and windows when choosing the replacement uPVC handle. The handle must match your existing doors in terms of colour and style. Certain handles are available in different types of finishes, like black tilt and turn window handles white. Others are available in more stylish options, like chrome or gold.

It's important to get your screw-to-screw and PZ measurements right when taking your measurements. The PZ measurement refers to the distance between the middle of the spindle hole as well as the centre keyhole. The screw-to-screw dimension is the distance between the screw hole on your current handle and the nearest screw on your door frame, and it's important to measure this accurately to determine the right replacement.

Measurement and Fitting

A uPVC door handle has two levers that are located on either side of the lock mechanism making it easy to operate from inside and out. Providing a comfortable grip and strain-free functionality, the handles are also an essential part of a door's security mechanism. With the correct uPVC handles, you will be able to ensure that your door is safe and look stunning in the process.

It can be confusing to select the appropriate uPVC handles as there are numerous sizes, shapes and styles available. There are three main measurements to take into consideration when selecting a replacement for your uPVC doors. The backplate fixing centre keyhole and lever size, and the spindle's diameter are all important measurements. Taking these into account will ensure that the new handle fits your uPVC door and gives you an excellent fit.

It's simple to determine these points, however, you must be as accurate as you can. You could end with a handle that doesn't fit correctly and could cause issues when opening your uPVC doors. The most important measurement is the top screw on the backplate's fixing centre, commonly known as the PZ size. This measures from the keyhole's axis or handle lever to the centre of the screw. Generally speaking this is an measurement of 92mm however it may vary.

You should also check that your uPVC handles are equipped with the number of keyspindles required to operate your multi-point window locking handles system. It is ideal if they match the number keys you use to lock or unlock your uPVC door. Some older doors have a single spindle that locks the lock. More modern doors have two spindles that allow independent operation both inside and outside.

It is not advisable to have a sliding upvc replacement door handles handle because it puts an excessive tension on the locking mechanism. This could result in broken components. To avoid this, look for a set of uPVC door handles that come with spring cassettes. They're not just attractive, but they reduce the operating pressure on your door locking mechanism and could increase its lifespan.

Broken Spring Cassettes

If a door handle gets stiff, it could be caused by a fault within the tubular latch itself. It is usually a simple solution and can be solved by repositioning internal fixing plates of the replacement handle. Open the door and check there are no obvious obstructions like loose screws, or indications that internal parts are protruding through the latch plate. If this isn't the case, then one of the springs in your uPVC handles may need to be moved.

A door handle repair kit is the most efficient way to accomplish this. It will include all the tools you require to remove the handles and then put them back in their cassettes. Follow the steps to complete the procedure and you'll soon have a sagging or drooping uPVC door handle that's once again fully operable.

A floppy uPVC door handle could be the result of thermal contraction, but is more often a sign that the gearbox inside is broken. This isn't something that you can fix at home, and requires the help of a locksmith expert.

It is important to use a genuine replacement gearbox to your uPVC doors. This will ensure everything is properly installed. A cheaper replacement part could cause issues like a malfunctioning multipoint lock or less security for your home.

You can also replace the whole uPVC lock and handle mechanism. This will not only fix the issue of sagging, but also ensure that your handle is functional and secure. It's important to note though that this isn't a quick or cheap solution and will require the removal of the current uPVC handle and replacement with an entirely new assembly. This is only applicable to double-glazed doors that have sprung handles, as the door will have to be repaired. For a more cost-effective and quicker option, you can purchase a new set of handles that have built-in springs which should reduce the need to drill doors.

Can I put a uPVC Door Handle to an Aluminium or Timber Door?

When it comes to choosing doors for your home there are many factors to consider. uPVC doors offer durability, security, and energy efficiency. Likewise, aluminium doors are modern and attractive. The proper handle is crucial for the type of door that you want to install. If you are looking to replace your old handles or even add new ones, it's important that you choose the right ones for your property. Our uPVC door handle replacement guide will assist you in making the right decision and install them with confidence.

The process of changing the handle on a uPVC door handle is easy and requires just a few tools. The first step is to remove the handle that was previously in use. This can be done by unscrewing the screws that keep it in place with the screwdriver. Once the screws are removed, you can pull the handle out of the door.

Next, you will need to measure the dimensions of your door handle. You'll need to determine the middle of the fixing holes on the backplate. This is often called PZ measurement. It is used to determine the handle spindle size. If you are aware of this information, you will be able to buy an alternative door handle that is of the correct size.

There are many kinds of uPVC handles to suit your requirements. Some of them are designed to include additional security features like anti-drill as well as cylinder guards and mole grips. These uPVC handles can be fitted to uPVC doors and aluminium and wood ones. They are ideal for those who want to increase the security of their home.

There are also uPVC handles that are more traditional. These are available in a variety of finishes such as black, gold, and chrome. These handles are usually a bit more costly than standard ones, but they will provide a beautiful finish to your door.

Once you have picked a suitable uPVC door handle, it is important to check the dimensions prior to placing an order. You'll need to consider the measurements above including the lever and key hole dimensions, as well as the backplate fixing centres to make sure that the new handle is a perfect match for your door.